ALM-EL3

Room thermostat heating 16A EL3

Delivery time 3-5 days

New product

27 Items

Before

59,99 € Tax included

Lieferzeit: 1 bis 3 Wochen

Add to wishlist

Customer ratings and reviews

Nobody has posted a review yet
in this language

Room thermostat touch EL3 for floor heating / electrical heating

The room thermostat EL3 ideal as room temperature controller for electric as well water underfloor heating systems. For an optimal temperature of the room, the room thermostat has an internal sensor, which measures the room temperature. The temperature below the desired or set on the room thermostat room temperature, measured by the room thermostat is an automatic heating contact is made. This room thermostat underfloor heating technology makes installing a floor sensor in water-bearing floor heating systems are redundant. If you, however, is a temperature value at a different location than the placement of the room thermostat, want to measure an external temperature sensor or floor sensor to the room thermostat can be nevertheless attach touch for underfloor heating. The external floor sensor is required for electric heaters be sure since he as heating limiter or overheating protection acts and thus essentially contributes to the safety of electrical heaters and avoids overheating of the foot covering.


A room thermostat with intuitive touch screen user interface and glass optics

The room thermostat touch EL2 can be controlled both manually easily than with temporal heating programs. The very intuitive and clearly arranged touch display shows the current room temperature, time, temperature and active time interval are displayed. Thanks to the ease of use, a personal day tailored to your temperature preferences or continues can be predefined in a few steps. Thereby, different block zones are used to set the desired room temperature controller - target values in the daily or weekly program. This enables a very efficient and ecological heating, which provides for a significant reduction in energy costs. A preset work program there was already a day and continues touch for under floor heating on the new installation of the room thermostat which can easily be adapted to your individual needs.

 

Technical data:

  • Operating voltage: AC 230V
  • Power consumption: < 0.5 (VA)
  • Switching current: 16A Max for actuator normally closed or electric heating
  • Temperature range: 5 ° C ~ 60 ° C
  • Temperature sensor: air sensor NTC
  • Temperature setting in steps: ± 0.5 ° C
  • Switching hysteresis: adjustable 1 ° C - 9 ° C
  • Display accuracy: 0.5 ° C
  • Display: stylish LCD display with touch (display is dimmed represented if, after 15 seconds no action)
    the display is fairly reflecting through the black glass optics
  • Data retention during power failure
  • Dimension housing: 86 x 86 x 40 mm LCD: 86 x 86 x 13 mm
  • Protection class: IP20
  • Room thermostat is not integrated into switch programs
  • Individual week program (5 + 2, 6 + 1, 7 days scheme)
  • Installation in flush-mounted box: horizontal mounting Ø 60mm

Scope of delivery:

  • Room thermostat for water floor heating or electric heating
  • Mounting material
  • external floor sensor (to connect only with electric heating / just leave out for actuators)
  • Operating instructions in German and English

Please keep in mind that the display with 2 screen protectors and the bottom foil is almost invisible!

Properties of room thermostat underfloor heating

The individual programming is programmable in six time intervals on weekdays and two time intervals on weekends. The room thermostat touch week program can be controlled in three different variations:
-5 + 2 days (6 blocks valid on all weekdays Mon-Fri, 2 blocks valid on sat and Sun)

-6 + 1 days (6 blocks valid on weekdays Mon-Sat, 2 blocks valid am so)

-7 days (6 blocks valid on all weekdays Mon-Sun)

In addition the room thermostat is fitted, touch for underfloor heating with a child lock or key lock what can avoid a unauthorized changing of the settings.

The special functions of the room thermostat touch

-a floor temperature limit. You allows you to set a maximum ground calorific value, especially for electric heaters, and is absolutely necessary for electric heaters.

-a frost protection function which drops the temperature not below 5 degrees Celsius. This can simply be activated in the menu of the room thermostat.

-When connecting the room thermostat to an actuator for underfloor heating control only 3 cores are required (l phase, N neutral conductor, and L1 - switch contact to the actuator). Contacts N and N1 are internally linked and require only 1 line.

-Temperature calibration, which matches the displayed actual value with the actual value of room temperature and, if necessary, corrected. In the sensor mode provides the room thermostat touch, whether the room temperature control only via the internal temperature sensor or the external or both sensors should be done.

Warning to the room thermostat

Electronic consumer may be installed only by suitably qualified personnel.

Reviews

Accessories

Customers who bought this product also bought:

5 other products in the same category: